전체상품목록 바로가기

본문 바로가기

뒤로가기

상품상세 정보

RCX H2205 (V2) 2950KV Outrunner Brushless Motor

(해외배송 가능상품)
기본 정보
상품명 RCX H2205 (V2) 2950KV Outrunner Brushless Motor
원산지 중국
판매가 15,500원
결제수단 카드 결제, 무통장 입금, 휴대폰 결제, 적립금, 실시간 계좌이체
배송방법 택배
제조사 RCX Hobby
소비자가 22,000원
상품간략설명 RCX H2205 (V2) 2950KV Outrunner Brushless Motor
영문상품명 RCX H2205 (V2) 2950KV Outrunner Brushless Motor
상품문의 0
국내·해외배송 국내배송
수량 수량증가수량감소
월 렌탈 금액

(개월 기준)
  • 개월 / 월
정기결제
구매방법
배송주기

정기배송 할인 save

  • 결제 시 : 할인

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드
상품 목록
상품명 상품수 가격
RCX H2205 (V2) 2950KV Outrunner Brushless Motor 수량증가 수량감소 15500 (  0)
옵션 정보
TOTAL (QUANTITY)0 (0개)

할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.

SOLD OUT BUY IT NOW예약주문REGULAR DELIVERY
대량구매문의

이벤트

게시글 신고하기

신고사유

신고해주신 내용은 쇼핑몰 운영자의 검토 후 내부 운영 정책에 의해 처리가 진행됩니다.

닫기

RCX H2205 (V2) 2950KV  Outrunner Brushless Motor

전통의 브랜드 RCX HOBBY의 레이싱드론 최강 브러쉬리스 모터!!




This H2205 stands between 1806 and 2206 motor, for those who needs higher thrust than 1806 motor but less weight than 2206. This 2950KV is suitable for both

  • 4 inch propeller on 3-4S
  • 5 inch propeller on 3-4S
    • if it is too hot with 4S + 5040/5045, then you may need to change it back to 5030.

It assembled with Imported NMB Bearing and Copper Wire to maintain the quality. The motor has been balanced by Motion Balancing Machine so you will see the colored balancing mud in the motor. There are lots of brands who claimed their motors are balanced but in fact it is only static balanced (this means just to filter the highly imbalanced CNC out), its balancing quality is far away from real Dynamic Balancing. If you do not see the balancing mud inside almost all motors, that means their "balanced" word is just a joke. Be Smart & Buy Smart!

Dynamic balancing is the most time consuming part when manufacturing a motor so factories don't like to balance the motors due to saving of labor work. RCX always cannot catch up the supply demand due to this reason (production quantity is limited by the balancing work). If a factory can supply heaps of motors to the market, do you think their motors are balanced well? If RCX does not need to balance the motor, the production would be much faster.














 

Quality Motor Best for 170-350 frames





Neat copper wire winding  
This H2205 motor made with Imported Copper Wire, NMB Bearings, Kawasaki Japan 0.2mm Silicon Steel.

All RCX H2205 Motors Are Factory Balanced!!
Unlike most other brands who do not balance their motors (or just lie that the motor has been balanced). All of our H2205 motors have been balanced by Dynamic Balancing Machine. It takes time so the production quantity (bottleneck) is limited. You will see the balancing mud in most of RCX H-Motors, it is the proof of *balanced*.




Motor Diagram
With both 16mm and 19mm mounting options in M3 screw size, it will fit most frames in the market.




Thrust Test Table
This is a great KV Motor for 4 - 5 inch propellers.




Specification

  • Model: H2205-4
  • KV: 2950KV
  • Weight: Approx. 24-25g (net weight included long AWG cables)
    • you can lower the weight if you shorten the long AWG cables.
  • AWG Cable: 15cm
  • Prop Shaft Diameter: 5mm (CW)
  • Stator Diameter: 22mm
  • Stator Length: 5mm
  • Shaft Diameter: 3mm
  • Configuration: 12N14P
  • Motor Dimensions: Φ26.6*15.3mm
  • ldle Current: 0.86A @ 10V
  • Internal Resistance: 0.081Ω
  • Suitable ESC: 10-30A (depends on the propeller and battery you use)
    • HobbyWing's XRotor works pretty well with H2205 motor so it is recommended especially the XRotor 20A is small in size as small as some 10A-12A ESC.
    • Since SimonK and BLHeli might shutter during high RPM on small props (eg. 5030). So if you plan to drive the motor hard, please consider to get XRotor 20A or 40A because XRotor was tested at high RPM without any sync issue.
  • Suitable Battery: 3-4S Li-Po (refer to thrust test table and videos)

Maintenance Parts
Bearing and motor shaft are common consumable parts of a motor. You are recommended to replace a new one from time to time after a period of flight time. Replacement of bearings and motor shaft could sometime fix mirror issues. It is better for you to keep some for spare.

Package Included

  • 1 x RCX H2205-6 2950KV Micro Outrunner Brushless Motor
  • 1 x Hex Locknuts M5 (Slip-Resistant) - CW
  • 1 x Circle Plate
  • 1 x Set of M3*5 Screw


PAYMENT INFO

고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.  

무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.  
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

DELIVERY INFO

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,000원
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
    고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.

EXCHANGE INFO

교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
  경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
  다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
  포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
  (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
  따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
  제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
  (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
  (색상 교환, 사이즈 교환 등 포함)

SERVICE INFO